ARA-1 Operations Manual
4-4
INTEROPERABILITY NOW
4.3.5
System Information Prompts
The ARA-1 can “speak” the current network settings out over the radio port as an aid to setting
up the units. This is particularly useful if you have set the unit to use DHCP and you do not know
the assigned IP address.
The unit responds to specific DTMF or COR Cadence sequences and speaks the IP address,
subnet mask, and gateway address as specified below:
Table 4-1
System Information Prompts
DTMF Sequence
COR Cadence
Spoken Value
* * 0 #
10
IP Address
* * 1 #
11
Subnet Mask
* * 2 #
12
Gateway Address
As an example, if a radio user transmits the DTMF characters
* * 0 #
to the radio associated with
the ARA-1, the ARA-1 will key the associated radio and announce the IP address. Alternatively,
the remote radio user may click the mic 10 times to get the same information
(as long as the radio’s COR output is connected to the ARA-1 and properly configured, see
Section 3).
End of Section 4