Using a component video cable to connect
to your TV
Follow the diagram below to connect the Xbox 360™ con-
sole and Control Center™ 540C using a component video
cable with stereo audio to your TV.
1) Connect the AV interconnect cable to the A/V connector
on the rear of the Xbox 360™ console and the input channel
1 connector on the Control Center™ 540C.
2) Slide the switch on the AV Interconnect Cable to the SD
or HD position.
The HD position should be selected if your TV supports
High Definition resolutions such as 480p, 720p and 1080i
3) Check the Control Center™ 540C is set to output a
component video signal from input 1 (Xbox 360™ console).
Note:
If you choose to connect the Control Center™ 540C
to the component video input on your TV, you must select
the component video setting on the Control Center™ 540C
in order to display the picture correctly. If you are connecting
via component video and you see no picture on your TV,
check the Control Center™ 540C is set to output YUV or Y,
Pb/Cb, Pr/Cr. For details, see the section on Control
Center™ 540C settings.
4) Connect a component cable (sold separately) to the AV
multi output and the TV. Match the color-coded connectors
of the component cable to the corresponding connectors on
the rear panel of the Control Center™ 540C and to the TV.
REMEMBER:
Component video does not carry audio sig-
nals so it must be combined with a right and left audio cable
or a digital optical cable (both sold separately).
5) Select the appropriate video input on your TV (refer to
your TV instruction manual for connection details).
4
ENGLISH
Pr/Cr
Pr/Cr
Pb/Cb
Pb/Cb
Y
Y
XBOX360 Console
540C Control Center
TV Component
Video inputs
Component Cable
Green
Blue
Red
AV Interconnect
Cable
(supplied)
