Parking Adjustment
Park brake “OFF” Park brake “On”
Figure 6
Figure 7
Pull the park brake lever up so that the unit can engage park brake.
To release the unit, press button on front end of parking lever then push the parking
lever to the bottom.
Adjust the parking cable if necessary.
Gear Shift Adjustment
Loosen the bolts.
Press down the clutch pedal fully.
Operate the shift lever as to
change gearshift from 1 to 4 and
reverse smoothly.
First, tighten bolt 1 with
thread glue. Then second, tighten
bolt 2 with thread glue. At last, tighten
bolt 3 with thread glue. (
See Fig. 8
)
Figure 8
Break-in
The first month is most important in the life of your vehicle. Proper operation during
this break-in period will help assure maximum life and performance from your new
vehicle. The following guidelines explain proper break-in procedures.
1. After the engine starts, the engine is not allowed in high speed in the neutral
gearshift.
2. Drive vehicle from stop to low speed slowly.
3. Avoid braking strongly.
4. Do not exceed the vehicle speed on the below schedule
The speed of vehicle
The first 1000 km
27
