manualshive.com logo in svg

Joyner JNSZ1100SVB, Руководство пользователя, Страница: 26 / 228

Поделиться
Скачать
Joyner JNSZ1100SVB Скачать руководство пользователя страница 26

 

8. SPECIFICATIONS 

DIMENSIONS 

Overall Length------------------------------------------------------------------------------------------------------------123 in. (3130mm) 
Overall Width ------------------------------------------------------------------------------------------------------------- 75 in. (1910mm) 
Overall Height ----------------------------------------------------------------------------------------------------------- 69 in. (1745mm) 
Wheelbase ---------------------------------------------------------------------------------------------------------------- 89 in. (2270mm) 
Front Track --------------------------------------------------------------------------------------------------------------- 66.5 in. (1690mm) 
Rear Track -------------------------------------------------------------------------------------------------------------------65 in. (1650mm) 
Ground Clearance -------------------------------------------------------------------------------------------------------- 12.5 in. (320mm) 
 

ENGINE 

Type ------------------------------------------------------------------------------------------------------- 4-Bore, 4-Stroke, Liquid-cooled 
Bore x Stroke --------------------------------------------------------------------------------------------------------------- 72mm×66.5mm 
Displacement --------------------------------------------------------------------------------------------------------------------------- 1080cc

 

Corrected compression ratio ----------------------------------------------------------------------------------------------------------- 9.5:1 
Carburetor ------------------------------------------------------------------------------------------------------------

 

Electric Fuel Injection 

Output Power -----------------------------------------------------------------------------------------------------------------------------50KW 
Maximum Torque ----------------------------------------------------------------------------------------------------------------------- 90N.M 
Starting ----------------------------------------------------------------------------------------------------------------------------------- Electric 
Ignition -------------------------------------------------------------------------------------------------------------------------------------- C.D.I 
Lubrication -------------------------------------------------------------------------------------------------------------------- Force & Splash 
Transmission --------------------------------------------------------------------------------------------- manual clutch, 4 shift/Reverse 
Fuel type -------------------------------------------------------------------------------------------------------------------- RQ93 (unleaded) 
Engine oil------------------------------------------------------------------------------------------------------------------------- SAE-10W/30 
Gear oil-------------------------------------------------------------------------------------------------------------------------- GL-4 75W/90 

CAPACITIES 

Maximum load --------------------------------------------------------------------------------------------------------------------------- 250kg 
Fuel tank -------------------------------------------------------------------------------------------------------------------------------- 21.5L 
Engine oil ---------------------------------------------------------------------------------------------------------------------------------3500ml 
Gear oil -----------------------------------------------------------------------------------------------------------------------------------2000ml 
Coolant -----------------------------------------------------------------------------------------------------------------------------------6000ml 
Starting ---------------------------------------------------------------------------------------------------------------------------------------- <5s 
Climbing --------------------------------------------------------------------------------------------------------------------------------- 20°-25° 
Battery --------------------------------------------------------------------------------------------------------------------------------- 12V45Ah 
Head Light ----------------------------------------------------------------------------------------------------------------- 12V 55/55W/Both 
Tail Light -------------------------------------------------------------------------------------------------------------12V10W/5W/21W/Both 
Spot light ------------------------------------------------------------------------------------------------------------------------12V35W/Four 
Main Fuse ------------------------------------------------------------------------------------------------------------------------------------50A 
Brake Track --------------------------------------------------------------------------------------------------------------- < 7m @ 20miles/h 
Top speed -------------------------------------------------------------------------------- 62 miles/h (or limited as customers require) 
 

CHASSIS 

Front, Rear brake -------------------------------------------------------------------------------------- Hydraulic disc, right foot control 
Front tire -------------------------------------------------------------------------------------------------------------------- 25×8-12

（

option

）

 

Front tire -------------------------------------------------------------------------------------------------------------------- 27×8-12 
Rear tire -------------------------------------------------------------------------------------------------------------------- 25×10-12

（

option

）

 

Rear tire -------------------------------------------------------------------------------------------------------------------- 27×11-12 
Front Suspension ----------------------------------------------------------------------------------------------- Independent Dual A-Arm 
Rear Suspension ----------------------------------------------------------------------------------------------- Longitudinal Control Arm 
Final Drive ------------------------------------------------------------------------------------------------------------------------- shaft driven 
 
 

TIRE PRESSURE 

Front ------------------------------------------------------------------------------------------------------------ 103kpa,1.05kg/c

㎡

 15psi 

Rear --------------------------------------------------------------------------------------------------------------103kpa,1.05kg/c

㎡

 15psi 

 

WEIGHT 

Net Weight --------------------------------------------------------------------------------------------------------------------------------550kg 
 

Warranty (factory limited scope) --

----------------------------------------------------------------------------------------- 90 Days 

Содержание JNSZ1100SVB





































































































































































































































Отзывы:

Нет отзывов