17
TECHNICAL SPECIFICATIONS
Model
JC-610 (TMB 995)
Description
Arm blood pressure monitor
Method of measurement
Oscillometric
Mode of operation:
Continuous operation
Protection against ingress of water:
IP21
Degree of protection:
Type BF applied part
Measurement range
Rated cuff pressure: 0mmHg-300mmHg (0kPa-40kPa)
Measurement pressure:
40mmHg-230mmHg (5.3kPa-30.7kPa)
Pulse value:
(40-199) beat/minute
Accuracy
Pressure: 5°C-40°C within ±3mmHg (0.4kPa)- Pulse value:±5%
Power
appliance powered by internal electric source, 4 AA batteries (included)
DC 6V 1A power pack (not included)
Operating conditions
from +5°C to +40°C , humidity ≤ 85%
Storage and transportation conditions
from -20°C to +60°C , humidity 10% RH~ 93%RH
Display
LCD
V.A.
80X60mm
Memory
60 measurements with date and time
Product dimensions
approx 102x143x73 mm
Product weight
about 500gr, batteries included
Circumference of arm cuff
approx. 22~42cm
Power-off
automatic after around 1 minute unused
Accessories
arm cuff with tube, instruction manual, 4 “AA” batteries(test batteries are included).
The supplied batteries are for trial use only and they may have a shorter life.
Warning:
The Blood Pressure Monitor JOYCARE was designed to measure blood pressure exclusively in adults.
Distributed under the brand JOYCARE, by JOYCARE S.R.L.. sole partner - Via Massimo D’Antona, 28 - 60033 Chiaravalle (AN) - Italy
GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO.,LTD.
Zone A, No.105 ,Dongli Road, Torch Development District,Zhongshan,528437,Guangdong,China
MDSS - Medical Device Safety Service GmbH, Schiffgraben 41, 30175, Hannover - Germany.
DISPOSAL
The device (including its removable parts and accessories) must not be disposed of together with municipal waste at the end of its life,
but in compliance with European Directive. Since it must be handled separately from household waste, either carry it to a separately-collected
waste disposal centre for electrical and electronic appliances or give it back to the retailer on purchasing a new device with the same purpose. Any
infringement will be severely prosecuted.
The batteries used in this device must be disposed of in the special bins at the end of their life.
All the instructions and drawings are based on the latest information available at the time of going to print and may be subject to change.
MADE
IN CHINA
JC-610 (TMB 995)
has been manufactured in compliance with the European directives 93/42ECC 0197
0123
See the documentation attached
Type BF applied part
Symbols:
Date of manufacture
Expected service life of device: about 9 years if calculated by 3 times measurement per day.
