Joycare JC-508, Руководство пользователя

Страница: 13 / 68

12 13
Move the clippers slowly over the crown of the head, proceeding in
different directions in order to achieve a uniform cut.
Make repeated passes over the head to ensure that the clippers cut all the
hair. Comb the hair every so often in the direction of growth, to allow the
clippers to grasp the hair more easily.
In order to obtain a good result with curly, thinning, long or fine hair, make
use of a comb to guide the hair towards the device.
We advise you to eliminate hair from the device at frequent intervals.
ALIGNMENT OF THE BLADES
The hair clippers are put on sale ready for use and with the blades already
aligned and lubricated. If the blades are not aligned correctly, they must
be re-aligned in the following manner:
Slightly loosen the holding screws, and ensure that the teeth of the two
blades are matching. Position those of the upper blade about 1.2 mm
higher than those of the lower blade (as shown in the diagram), then re-
tighten the screws.
1,2 mm
TECHNICAL FEATURES
Power supply: 220-240V ~ 50 Hz
Wattage: 10 W
Stainless steel blades
4 cutting guides
Cleaning and maintenance set
Hairdressing set
Operation use conditions:Room temperature: from 10°C to 40°C.
Relative humidity: from 30% to 75% without condensation. Pressure:
from 700 – 1060 hPa.
Environmental transportation and storage conditions: Temperature:
from 10 to 40°C. Humidity: from 5 to 95%. Pressure: from 700 – 1060 hPa.
CLEANING AND MAINTENANCE
- Before starting cleaning the appliance, always unplug the appliance.
- Never immerse the appliance in water.
- Clean the unit with a damp and soft cloth.
- After having used the appliance remove the comb and using the cleaning
brush clean the body of the device, in order to remove any hair from the
cutting blade.
- Never use detergents and solvents to clean the appliance.
- In order to grant a long and good performance to the appliance, it is
advisable to oil often the appliance. Unscrew the cutting unit, apply on
oil drop and then allow the machine to run for several seconds so that the
unit can lubricate properly.
- Fit the protective cap after use; keep the device only with the fitted
protective cap.
SYMBOLS
This appliance complies with all applicable European Directives.
Class II appliance
DISPOSAL
The device (including its removable parts and accessories) must not
be disposed of together with municipal waste at the end of its life,
but in compliance with European Directive. Since it must be
handled separately from household waste, either carry it to a
separately-collected waste disposal centre for electrical and electronic
appliances or give it back to the retailer on purchasing a new device with the
same purpose. Any infringement will be severely prosecuted.
All the instructions and drawings are based on the latest information available
at the time of going to print and may be subject to change.
F
MANUEL D’INSTRUCTIONS
Nous vous remercions d’avoir acheter la tondeuse à cheveux JOYCARE.
Pour un usage correct de l’appareil, on conseille de lire attentivement les
instructions suivantes.
AVERTISSEMENT CONCERNANT
LA SÉCURITÉ