Joycare JC-508, Руководство пользователя

Страница: 11 / 68

11 10
this is your first experience of cutting hair, use the largest comb accessory.
Avoid using the product for more than 8 minutes at a time. If you need
to use it for longer, allow the device to cool down for about 10 minutes
before recommencing use.
After every use, turn off the switch and remove the plug from the electric
socket.
TRIM LENGTH ADJUSTMENT LEVER
The lever is conveniently positioned on the left
side of the device, so that it can be moved by the
thumb of the right hand while you are holding
the clippers. By moving the lever up and down,
you can control the depth of the trim. So, when
the lever is in the highest position, the resulting
trim will be shorter, and in the lowest position it
will be longer.
The length of the cut ranges between a minimum of 1mm and a maximum
of 2.4 mm.
In addition, you are advised to use this lever to remove any hair that
remains caught between the two blades. By moving the lever up and
down rapidly while the machine is still switched on, you can clean the
blades completely without needing to remove them.
CUTTING GUIDES
By use of the 4 cutting guides provided, you can adjust the length of the
trim up to a maximum of 12 mm (with the guide comb inserted).
The cutting lengths are as follows:
Without a guide comb: 1 mm to 2.4 mm
With guide combs: from 3 - 6 - 9 - 12 mm. The length of the cut is shown
on the guide comb.
IMPORTANT: The device must always be turned off when inserting or
removing a cutting guide.
HOW TO CUT HAIR USING THE CUTTING GUIDES
Ease the comb into the grooves on the device until you hear a click.
Check that the comb is correctly inserted in the grooves on both sides.
Select the desired setting for the length of cut (3/6/9/12 mm).
It is advisable to start with the maximum length in order to familiarise
yourself with the device.
Check that the flat side of the comb is always in contact with the scalp, in
order to obtain the best possible cut.