28
139894 GF 160 DV IPI 12/17
Remote
transmitter
function keys.
ON/OFF Key
THERMOSTAT Key
UP/DOWN Key
MODE Key
Blue LCD Screen
Figure 15.2. Remote transmitter display data.
Remote Control Functions
Pilot Mode
Set the Mode switch to ON to light the pilot.
The
burner will ignite and remain on until manually
switched
OFF
.
Burner Control
Set the stove burner switch to REMOTE for Proflame 2
remote control.
OFF
- Turns off both remote and manual burner
functionality. Switch to OFF when the stove will not be
used for an extended period of time.
Remote Transmitter
The Transmitter features a simple button layout and
informative display screen. See fig. 15.2.
LCD DISPLAY
- graphically indicates temperature
settings and status of the Thermostat, Burner, and
Accent Lamp.
ON / OFF Key
- controls Burner and Lamp functions.
THERMOSTAT Key
- Used to set either Manual or
Thermostatic Control and index through thermostatic
functions.
UP / DOWN Arrow Key
- Selects thermostat
temperature range and flame height.
MODE Key
- used to select the component to be
controlled: CPI/IPI, Burner, and Accent Lamp.
The supplied Wall Mount Bracket can be used for
convenient hand-held transmitter storage.
Initializing the System
1. Press the Controls Access Door to release its magnetic
catch and swing the panel down.
Switch the Mode to
REMOTE
. See fig. 15.1.
2. Install three AAA batteries into the Transmitter
handset.
3. Press the
PRG button
on the Left front corner of the
switch plate. The board will “beep” three times and a
yellow LED will indicate a 10-second synchronization
time limit.
4. Within 10-seconds, press the Tramsmitter
ON
button.
The IFC will “beep” three or four times to indicate that
it has acknowledged the transmitter command and
sets to the particular code of that Transmitter.
5.
After initialization, place the Mode switch in the
REMOTE position.
The hand-held transmitter can then
be used to control the burner.
To return to full Manual functionality
:
• Switch the Mode to
REMOTE
.
• Press the red button on the until it “beeps” three
times. Within 10 seconds, press the button again until
acknowledgement is signalled.
Fan - not available
