16
139894 GF 160 DV IPI 12/17
8. Baffle Conversion - PROPANE ONLY:
•
Remove two, 10 mm nuts to detach and drop the
Exhaust Baffle. You do not need to remove it from the
firebox. See Fig. 7.4.
• Loosen two, 10 mm nuts on the Upper Baffle,
(Figs. 7.4 and 7.4a), enough to break both end wings off
at the perforations. Retighten the two nuts.
• Replace the Lower Baffle.
9. Replace the Burner.
Tilt the burner assembly downward
to engage the venturi tube with air shutter assembly.
BE CERTAIN THE BURNER IS LEVEL AND SECURELY
ENGAGED WITH THE FRONT SUPPORTS ON THE
FIREBOX FLOOR.
10. Remove the Utility Panel from the rear leg. Fig. 7.5.
Remove the upper M6 bolts and loosen the lower bolts.
Remove the panel by tilting it forward and off of the
lower bolts.
Figure 7.5. Remove Utility Panel.
Figure 7.4. Upper Baffle, LP conversion.
Exhaust Baffle
Upper Baffle
Remove
Upper Baffle
wings
Figure 7.4a.
Break off the Upper Baffle wings, LP conversion.
Upper M6
bolts
Lower M6
bolts
