jotron Tron SART20, Руководство пользователя

Страница: 30 / 40

Doc. No.: 84145 Rev. L
jotron.com
Page 30 of 40
9.1 Testing
Although the Tron SART20 does not send an alarm via satellite, VHF or
other radio communication, usage should be limited to short tests. This
ensures the best battery capacity available for a potential emergency.
Do the following steps to test the Tron SART20:
The test should be conducted in open sea to avoid
interference on the radar display from land echoes.
1. Move the switch to the TEST position and hold.
Simultaneously a person should observe the radar
display to check for correct pattern. The radar should be
set to a 10NM range.
2. Release the switch when the LED start flashing.
The Tron SART20 will now run through a self-test
procedure.
When a Tron SART20 is activated, it will respond to any 3
cm radars within range. Tests must be as short as
possible (5 min) to avoid interference and battery
capacity loss.