Doc. No.: 85355 Rev. H
jotron.com
Page 36 of 48
The Tron AIS-SART will now run through a self-test
procedure. If a RED LED flashes, it indicates a critical
fault. Refer to the error codes for more information.
2.
Release the switch when both LEDs start flashing. The unit will
now search for the GPS position. It will only search for 15 minutes
max.
Figure 31 Image: LEDs ON
3.
A successful test is indicated by a 15 sec BEEP and a GREEN LED.
Refer to AIS transponder/Electronic chart for additional
description information.
Figure 32 Image: Green LED
4.
An unsuccessful test is indicated by a 15 sec BEEP and a RED LED.
If this should happen, relocate the unit, and restart the test.