Doc. No.: 85355 Rev. H
jotron.com
Page 37 of 48
Figure 33 Image: Red LED
5.
To cancel an ongoing test, hold the switch in the TEST position
until the buzzer starts to beep.
9.2
Error codes (red flash during testing)
If the self-test detects a fault during testing, one or more of the following
indications are shown:
Number of
LED flashes
Error codes
2
Transmit power failure
3
Low battery
4
Transmit frequency error
5
User ID not programmmed
6
Undefined, contact Jotron
7
Internal communication error
Table 4 Tron AIS-SART error code descriptions – red flash during testing
Test procedure instructions are also indicated on the
product label.
