jotron.com
Page 40 of 56
2.
Press down and hold in place the spring-loaded bracket plate and
remove the hydrostatic unit by sliding it out of its locking slot.
3.
Install the new hydrostatic unit while continuing holding down
the spring-loaded bracket plate and sliding the unit into its locking
slot.
4.
Mount the EPIRB in the bracket. See chapter 5.5 for instructions.
Only Jotron HRU kit is acceptable for use. Any use of
unoriginal spare parts will invalidate the product type
approval certificates, and warranty will not apply. It may
also compromise your safety.
