jotron.com
Page 16 of 56
3.5.2
Extended self-test
The extended self-test includes a GNSS test in addition to the normal self-
test.
To perform the extended self-test, do the following steps within a period of
3 seconds:
1.
Move the switch to test position
2.
Release to middle position
3.
Move the switch to test position and release when the white test
indicator lights up.
The white test indicator LED will light up and the green GNSS indicator LED
will start flashing in sequences of 3 fast flashes. This indicates that the
EPIRB is searching for a validated position.
When a valid position is found the green GNSS indicator LED will remain lit
for approximately 1 second and a normal self-test will continue.
The top light will flash once at the end of the text if the extended self-test is
successful.
