17
www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON
Switching Pretreat Solution
Volume Chart
1) When switching between pretreat solutions, close the valve by turning the valve in
counterclockwise. Then, open the 4th valve which should be filled with water for cleaning.
2) Press the “CLEAN” button. Let the machine spray until you see
no pretreat solution in the tube (7~10 seconds).
3) Close the 4th valve (distilled water) and open the preferred valve.
Press “CLEAN” button to flush out the water (7~10 seconds).
Once you see the tubes filled with pretreat solution,
press “CLEAN” button again to stop spraying/flushing.
The above are general guidelines on the speed and setting to use the pretreat your shirts.
Please note that some adjustments may be needed depending on the pretreat solution you
use.
If shirts are not dry using the recommended heat press settings, please repress the shirt until
it is completely dry before printing.
Not all shirts will be the same, so we highly recommend you do testing on any new shirts you
pretreat before going into commercial production.
* The volume of the pretreat liquid showed on the display is provided for general information purposes only.
It does not represent the accurate volume of the liquid.
ECOFREEN/ Joto will have no responsibility for the accuracy of the data and the issue which may arise from using
or relying on the information.
VOLUME
1
30
6
6
10
