15
www.jotoimagingsupplies.com 1-800-565-5686 Blaine, WA | Las Vegas, NV | Antioch TN | Coquitlam, BC | Brampton, ON
Saving a Preset
Setting the Cost of Pretreat Liquid
4)
Exit the Preset Mode
After setting spraying area, the nozzles will automatically go back to the start point.
If the control panel are still blinking, press and hold Settings button
on the control panel until you hear a beep.
Once LED is on and no other lights of the control panel
are blinking, is ready to be operated.
5)
Retrieve the Preset Number and Spray
Retrieve the preset and press “START/STOP” button
Overwriting the Preset Options
If you have used all the preset options ( 1-9), you can overwrite any saved settings by
following the same steps of Saving a Preset (Page 12-14).
1) Press button to change the cost of pretreat liquid.
2) When the numbers on the control panel (See picture on the right)
are blinking, press and buttons to set the cost.
3) After setting the cost, press button to save the setting.
* The cost of the pretreat liquid showed on the display is provided for general information purposes only.
It does not represent the accurate cost of the liquid.
ECOFREEN/ Joto has no responsibility for the accuracy of the data and the issue which may arise from using or
relying on the information.
VOLUME
POWE
R
1
03
6
6
10
