7
4.4
Disposal instructions for lubricant
The disposal instructions for used lubricants are supplied by the lubricant
manufacturer.
BP JS 14-2 / Renolit LZR 2H special grease
Dispose of the grease as special waste, waste No. 54202
PCB content: contains no PCB
Halogen content: contains no halogen
4.5
Disposal instructions for the landing gear
The fitted parts are valuable raw materials that can be recycled. These can
be split into plastic, rubber and metallic fractions.
The plastics and rubber are marked pursuant to VDA Recommendation
260. Before disposal, external oil and grease is to be cleaned off the parts,
if necessary.
Fault
Cause
Remedy
The landing gear
cannot be extended
Connection shaft too long
Spindle or gear defective
Leg or inner leg bent
Reduce the length
of the connection
shaft
Repair the landing
gear
The landing gear can
only be extended until
it touches the ground
Incorrect gear engaged
Engage the low
gear before the leg
touches the ground
Changing gear is
impossible
Gear defective
Repair the landing
gear
The landing gear
cannot be retracted
Spindle or gear defective
Leg or inner leg bent
Repair the landing
gear
4
Servicing
5
Troubleshooting
JSK-Modul-en-26.04.05.fm Seite 7 Dienstag, 26. April 2005 2:00 14
