8.11 Print multi-colored objects
There is a simple way to create layer-based multi-colored 3D prints directly in PrusaSlicer - see the
instructions below.
Multicolored object printed using color change feature in PrusaSlicer
Color change in PrusaSlicer
1.
Switch to the layer preview using the button in the lower-left corner
2.
Using the slider on the right side, select a layer where the color change should occur
3.
Click on the
orange plus icon
4.
A preview is instantly displayed. You can remove the color change by clicking on the grey cross
button that is now displayed instead of the orange plus button
5.
Export the G-code and you’re ready to print!
Setting up color change in PrusaSlicer
31
