•
Save Crash Dump
•
Sound Mode
•
Sound Volume
•
Info
•
System info
•
Version info
7.2 Mesh Bed Leveling explained
Mesh bed leveling can be found in
LCD Menu - Calibration.
This procedure is performed before every
print. It is also the same procedure that also happens at the start of First Layer Calibration (see next
chapter)
The M.I.N.D.A probe goes through a
4x4 grid pattern spread across the sheet
(whether it is a
powder-coated or smooth PEI does not matter) and measures the distance to the sheet. These points
are interpolated and used to create a virtual mesh of the bed. If the bed is slightly warped, the
probe
will still precisely follow the surface
during printing according to its measured mesh, improving
the quality of the first layer.
7.3 Factory reset
A factory reset can be performed through
LCD Menu - Settings - Factory Reset.
This will reset all
data to default values.
7.4 Network connections
Original Prusa MINI has an ethernet (RJ45) port onboard. You can use this port to connect your
printer to your network.
Please note that network features may not be fully available in the default firmware. Keep checking
our web
www.prusa3d.com
or social media profiles where we publish information about updated
firmware versions.
22
