JOSAM JH1500 Скачать руководство пользователя страница 8

8

induction heating

Induction heater JH1500

WARNING!  

Do not fill the water tank with 
anything other than decalcified 
water mixed with propylene 
glycol. Incorrect handling can 
cause personal injury and/or 
damage to equipment. 

WARNING!
Warning 

is used in this manual 

to draw attention to possible 
dangers that can result in 
personal injury. When an 
instruction is given, it is normally 
followed by a short explanation 
and the possible results if the 
instruction is not followed.

NOTE! 
Note 

is used to indicate 

additional information that 
should be followed to obtain 
problem free or the best use of 
the equipment. 

IMPORTANT!
Important 

is used to draw 

attention to possible dangers 
that can result in damage 
to the equipment and/or the 
environment.

The following types of warnings and 
information are used in this manual:

Apart from the safety signs shown in 
the section "Safety Signs", the following 
warnings and important information can 
be found in the operating instructions:

WARNING! 

Do not place the 

induction heater on unlevel or 
instable surfaces. The induction 
heater can fall over and cause 
personal injury or serious 
damage to the induction heater. 

WARNING! 

All electrical modi‑

fications must be performed by 
a qualified electrician.  
Danger of electrical shocks. 

WARNING! 

Do not touch 

objects that have been close to 
the inductor without checking 
that they have cooled down. 

WARNING! 

Do not touch the 

inductor while it is activated 
and the strong magnetic field 
and the heat are on. Danger of 
personal injury. 

WARNING! 

The work area 

must be kept free of flammable 
material when you are working 
with the induction heater. 

WARNING! 

Make sure that fire 

fighting equipment is available. 
Danger of personal injury. 

WARNING! 

Loose cables 

and hoses constitute a risk for 
tripping. Danger of personal 
injury. 

WARNING! 

If you do not remove 

paint and other chemicals from 
the material before you heat it 
up, you must use an extraction 
fan to remove vapours that are 
injurious to health. Danger of 
personal injury. 

GENERAL WARNINGS

Содержание JH1500

































Отзывы: