2
SAFETY INSTRUCTIONS
SAFETY AND PROPER USAGE
To ensure safe and enduring performance of this product, you must comply strictly with the
instructions enclosed herein. Non-compliance with instructions or improper handling of the
product will void your warranty! This product is designed to drain condensate from compressed
air systems. Usage of this product in conditions not specified in this manual or in contrary to the
instructions hereby provided is considered IMPROPER. The manufacturer will not be held liable
for any damages resulting from improper use of the product.
SAFETY & WARNING INSTRUCTIONS
ATTENTION
- Observe valid and generally accepted safety rules when planning, installing and using this
product.
- Take proper measures to prevent unintentional operation of the product or damage to it.
- Do not attempt to disassemble this product or lines in the system while they are under
pressure.
- Always depressurise the compressed air system before working on the system.
It is important that personnel use safe working practices and observe all regulations and
legal requirements for safety when operating this product. When handling, operating or
carrying out maintenance on this product, personnel must employ safe engineering
practices and observe all local health & safety requirements & regulations. International
users refer to regulations that prevail within the country of installation. Most accidents,
which occur during the operation and maintenance of machinery, are the result of failure
to observe basic safety rules or precautions. An accident can often be avoided by
recognising a situation that is potentially dangerous. Improper operation or maintenance
of this product could be dangerous and result in an accident causing injury or death. The
manufacturer cannot anticipate every possible circumstance, which may represent a
potential hazard. The
WARNINGS
in this manual cover the most common potential
hazards and are therefore not all-inclusive. If the user employs an operating procedure, an
item of equipment or a method of working which is not specifically recommended by the
manufacturer he must ensure that the product will not be damaged or made unsafe and
that there is no risk to persons or property.
Содержание TEC-11
Страница 9: ...9 SERVICE CHART Date Description Name...
