GENERAL WARNINGS
This appliance shall only be used with the
Australian Approved 1200mm Propane gas
hose & regulator assembly supplied with the
appliance and must be connected only to a
Propane gas cylinder certified to AS2469
standards fitted with POL connections only.
This appliance is to be stored in a dry &
well-ventilated location free from direct
sunlight. Do not store when still connected
to the cylinder. Make sure that the cylinder
is disconnected and is stored in a well-
ventilated area, free from direct sunlight,
heat and ignition sources. If being stored
indoors, ensure that the location complies
with the standard AS/NZS1596.
This appliance must only be serviced by an
authorized service agent, return to your
place of purchase for service & repair.
DANGER!
•
This appliance is designed for
outdoor
use
only.
•
Use only in well ventilated areas.
•
Do not use the appliance if it has a leak,
or has worn, deteriorated or damaged
seals.
•
Accessible parts may be very hot. Keep
young children away.
•
It may be hazardous to attempt to fit
other types of gas containers or
cartridges.
•
This appliance shall only be used in an
above ground open-air situation with
natural ventilation, without stagnant
areas, where gas leakage and products
of combustion are rapidly dispersed by
wind & natural convection.
•
Do not use adaptors or modify the
appliance to fit other connectors or
cylinders
•
When using this appliance children must
be supervised by an adult at all times
•
Never leave appliance unattended when
operating.
•
Do not use as a cooking appliance or
modify for any other reason.
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide,
which has no odour. Using it in an enclosed
space (For example, caravan, tent, car, mobile
home) may cause
DEATH
.
IMPORTANT
•
Avoid twisting & kinking the Propane Gas
hose.
•
If you smell gas immediately turn the gas
off at the cylinder and move the
appliance & cylinder to a well-ventilated
area outside, keeping well away from
sources of heat such as naked flames &
pilot lights.
•
Do not attempt to move or relocate the
appliance
when
it
is
operating.
Extinguish the burner & allow to cool.
Disengage the gas cylinder then move
the appliance.
CHECKING FOR GAS LEAKS
•
Check that all connections are tight and
that the gas cylinder connection has been
tightened before you turn the cylinder gas
valve on.
•
NEVER
check for leaks with a flame or
pilot light.
•
Using soapy water coat all connections, if
bubbles appear turn the cylinder gas
control off and retighten the connection
before re-testing.
•
Inspect the appliance regularly for signs of
wear, leaks or incorrect operation. If
symptoms such as flaring of the burners,
issues with lighting, damages to hoses or
connections or leaks from seals or gas
controls are identified do not attempt to
repair, contact customer service on 1300
669 500.
•
To check if gas remains in the cylinder,
disconnect from the appliance and hold
the cylinder in a vertical position then
shake from side to side, if there is a sound
or feel of liquid movement inside the
cylinder contains gas.