24
2
TO INSTALL BAGGER COM PO NENTS TO
TRACTOR
•
Remove discharge chute from rear of tractor. Unhook the
two (2) straps and pull chute out and away from tractor.
•
Remove the two (2) 3/8 nuts and flat washers from the
bolts at the tractor back plate.
1. Hook
2. Discharge
Chute
3. Back
plate
slot
02306
2
1
3
•
Using the nuts and flat washers removed from tractor
back plate, install the bagger support tube to the back
plate as shown. Tighten securely.
•
Install bagger support plugs into top of support tube.
•
Install the two upper support brack ets through the back
plate and to the chas sis using two each 3/8 x 19mm hex
bolts and 3/8 locknuts from parts bag. Tight en securely.
•
Assemble both support brackets to the outside of the
bagger support tube using two each 3/8 x 63,5mm hex
bolts, 13/32" I.D. flat washers and 3/8 locknuts from parts
bag. Tight en securely.
• Replace discharge chute into rear opening of tractor.
Secure the chute with the two hook straps.
NOTE:
The strap hook must go through the discharge chute
only. Do not allow the hook to enter the slot in the tractor
back plate. This will allow the dis charge chute to float with the
mower deck when moving on uneven terrain.
1. Dis
charge Chute
2. 3/8
Nut
3. Flat
Washer
022
77
1
2
3
1. Front
bagger
tube
2. Vinyl
binding
02
90
5
2
1
TO ASSEMBLE BAGGER
• Unfold bag by pivoting front bagger tube all the way
forward and pressing the bottom vinyl binding onto the
tube.
•
Inside the bag, install spreader bars and retainer springs
onto pins on both sides of bag as shown.
•
Press the vinyl bindings onto the sides of front bagger
tube.
3. Spreader
bars
4. Retainer
spring
5. Vinyl
binding
02
90
6
4
3
4
5
5
NOTE:
For tractors with an electric dump system, refer to the
kit instructions for more assembly procedures.
02330
3
5
4
1
2
1. 3/8 Lock nut
2. Flat
Wash
er
3. Support
Tube
4. Bolt
5. Bagger Support Plug
1. Support
Bracket
2. 3/8 Lock Nut
3. 3/8 x 63,5mm Hex
Bolt
4. 10,3mm
(13/32")
flat washer
5. Bolt
02590
2
4
1
3
5
Содержание Poulan 12597RB
Страница 83: ...83 ...
Страница 84: ...04 18 12 CL Printed in the U S A ...