background image

GENERAL SAFETY PRECAUTIONS

Important

 

A clearing saw, brushcutter or trimmer can be 

dangerous if used incorrectly or carelessly, and 

can cause serious or fatal injury to the operator or 

others. It is extremely important that you read and 

understand the contents of this operator's manual.

 

● The machine is only designed for trimming grass, 

grass clearing and/or forestry clearing.

 

● The only accessories you can operate with 

this engine unit are the cutting attachments we 

recommend in the “TECHNICAL DATA” section.

 

Never use the machine if you are tired, if you have 

consumed alcohol, or if you are taking medication 

that could affect your vision, your judgment or your 

coordination.

 

Never use the machine in extreme weather 

conditions such as severe cold, very hot and/or 

humid climates.

 

● Wear personal protective equipment. See 

instructions under the heading “Personal protective 

equipment”.

 

● Never use a machine that has been modified in any 

way from its original specification.

 

Never use a machine that is faulty. Carry out the 

checks, maintenance and service instructions 

described in this manual. Some maintenance and 

service measures must be carried out by trained 

and qualified specialists. See instructions under the 

“MAINTENANCE” section.

 

● All covers and guards must be fitted before starting. 

Make sure the spark plug cap and lead are not 

damaged. Otherwise you could get an electric 

shock.

 

● The machine operator must ensure that no people 

or animals come closer than 15 meters (50 feet) 

while working. When several operators are working 

in the same area, the safety distance should be at 

least 15 meters (50 feet).

 

a

WARNING:

 This machine produces an 

electromagnetic field during operation. Under 

some circumstances, this field may interfere with 

active or passive medical implants. To reduce 

the risk of serious or fatal injury, we recommend 

persons with medical implants to consult their 

physician and the medical implant manufacturer 

before operating this machine.

 

a

WARNING:

 Using an incorrect cutting 

attachment or an incorrectly filed blade can 

increase the risk of accidents.

 

a

WARNING:

 Never allow children to use or be 

in the vicinity of the machine. As the machine is 

equipped with a spring-loaded stop switch and 

can be started by low speed and force on the 

starter handle, even small children under some 

circumstances can produce the force necessary to 

start the machine. This can mean a risk of serious 

personal injury. Therefore remove the spark 

plug cap when the machine is not under close 

supervision.

Personal protective equipment

 

a

WARNING:

 You must use approved personal 

protective equipment whenever you use the 

machine. Personal protective equipment cannot 

eliminate the risk of injury but it will reduce the 

degree of injury if an accident does happen. 

Ask your dealer for help in choosing the right 

equipment.

 

a

WARNING:

 Listen for warning signals or 

shouts when you are wearing hearing protection. 

Always remove your hearing protection as soon 

as the engine stops.

 

„

Helmet

A helmet should be worn if the brush being cleared is 

taller than 2 meters (6 feet).

 

„

 Hearing Protection

Wear hearing protection that provides adequate noise 

reduction.

 

 

„

Eye Protection

Always wear approved eye protection. If you use a 

visor then you must also wear approved protective 

goggles. Approved protective goggles must comply 

with EN 166 in Europe, ANSI Z87 in the United States, 

and CSA Z94 in Canada.

 

„

 Gloves

Gloves should be worn when necessary, e.g., when 

fitting cutting attachments.

4

Содержание BC 2228





















Отзывы: