Jones Brothers Cape Fisherman Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 64

Jones Brothers Cape Fisherman Скачать руководство пользователя страница 11

OVERVIEW

5

© Copyright Jones Brothers Marine Manufacturing, Inc. 2008

2.2

Warranty

In the unlikely event a problem should arise with your Cape Fisherman, contact your Jones
Brothers Marine dealer as soon as possible. Please have your hull identification number
and necessary model numbers on hand for the item(s) needing service or repair. Your hull
identification number is located on the starboard side of transom and will always begin with
the letters JBS. An accurate copy of it may be made using a pencil to stencil the outline on
a piece of paper.

2.3

Boat Registration

Federal and state laws require that every boat equipped with propulsion machinery of any
type must be registered in the main state of usage. Registration numbers and validation
stickers must be displayed on the boat according to regulations. The registration must be
carried onboard when the boat is in use.

2.4

Insurance

Insurance on your boat should be obtained as soon as possible for protection against loss
by fire, theft, nature, etc. Many states have laws requiring minimum amounts of insurance
coverage. Contact your insurance agent for more information.

«
...
9
10
11
12
13
...
»

Содержание Cape Fisherman

































































Отзывы:

Нет отзывов