Jonco RATEL RC180 D, Руководство пользователя

Страница: 13 / 46

12
Start for models with engine
Oil level checking
Before start engine, the most importance is to check level of all oil, fuel, hydraulic
oil...
Refilling can be processed while machine is completely cool down. Slowly turning
lid to release pressure in the tank in order to avoid injecting.
Start engine
1. Put control rod at 'stop' position.
2. Be sure the emergency switch popup, fault light is off.
3. As this model is with 3 different power options, please start engine with
reference to engine manual.
4. Fire up the engine and keep engine idle running for 1-3 minutes, unlock the
clutch rod. Then pull rod to semi-coupling position and hold for 5 seconds till the
drum start running, then pull rod to lock position with lock rod pops in.
5. Warming up is very necessary for all oil filling, recycling. 5-10 minutes warming
up is highly recommended for each time working, especially the first using.
Fuel, and hydraulic oil is flammable, explosive, should be away from Smoking,
and any fire sources.
Hydraulic system crates pressure during working, and this pressure is high and
cause scalding and injuries to operator. so you have to release pressure and cool
oil down.
Do not let the engine idling with the clutch seperated for over 2-3 minutes, this
will cause excessive wear of the belt.
If you hear a suspicious noise when the engine is turned off indicating a loose
or broken part, have engine inspected by dealer.
In cold weather, it takes about 15 minutes to heat up the hydraulic oil. Cold
hydraulic oil will cause noise, pressure loss, cavitation and other damage to the
hydraulic pump and motor.
Danger
Notice