Jolywood HD108N Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 16

Jolywood HD108N Скачать руководство пользователя страница 9

①frame ②clip ③ M8 bolt ④mounting rail

④

②

③

①

5.2 Installation method

5.2.1 Mechanical installation and

precautions

5.2.2 Framed Bifacial Double-Glass

Modules (installation with clamps)

Clamp:

9

Jolywood (Taizhou) Solar Technology Co.,Ltd.

Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China

www.jolywood.cn

[email protected]

+86-523-8061 2361

Installation Manual

- Jolywood N-type Mono-crystalline Double Glass Module

①

③

④

②

5.1.6

Do  not  damage  the  back  glass  of  module  when
modules  mounted  on  the  bracket.  If  modules
need  to  be  replaced,  do  not  damage  the
surrounding modules or mounting structure.

5.1.7

When installing modules, do not work alone, and
keep working with a team of two or more men.

5.1.8

After modules are installed, the cables should be
ﬁxed  or  tied  to  avoid  exposed  under  direct
sunlight  after  installation,  which  would  prevent
cable from aging. Low-hanging cables can cause
various  problems,  such  as  electric  leakage  and
ﬁre.

5.1.9

The application level of module produced by
Jolywood is Class A. modules with diﬀerent color
should be avoided from installed in the same
array or roof.

Mounted with 4 clamps along long frame.
C-shaped steel parallel to the long frame.
Edge Clamp: width=40-50mm,
height=30mm. A=350±30mm
maximum test load: front ≤2400Pa
back ≤2400Pa

snow  and  wind  loads)  depends  on  the  way  of
module installed. The mechanical load should be
calculated  by  the  professional  system  designer
based  on  actual  conditions  and  environmental.
Moreover,  it  does  not  withstand  the  excessive
force generated by the thermal expansion of the
support  structure.  The  drain  hole  should  not  be
blocked under any conditions during installation
or use.

Modules could be mounted with clamps or bolts.
Modules  Installation  must  be  carried  out
according  to  the  following  examples  and
recommendations.  If  the  installation  method  is
diﬀerent  from  below  methods,  please  consult
Jolywood local technical support or after-sales, to
obtain the consent of Jolywood, otherwise when
the modules is damaged, the limit warranty would
be invalid.
The  mechanical  load  of  the  module  (including

JW-HD108N/P

«
...
7
8
9
10
11
...
»

Содержание HD108N

















Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды