Jolywood HD108N Скачать руководство пользователя страница 3

3

1.0

Introduction 

1.1

Declaration

1.2

Limitation of Liability

2    Safety precautions

2.1 Warning

2.2  General Safety

2.2.1

Jolywood (Taizhou) Solar Technology Co.,Ltd.

Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China

www.jolywood.cn

 [email protected]

 +86-523-8061 2361

Installation Manual

 - Jolywood N-type Mono-crystalline Double Glass Module

This manual contains relevant information about 
the  installation  methods  and  safe  operation  of 
photovoltaic  modules  (hereinafter  referred  to  as 
"modules") of Jolywood Solar Technology Co., Ltd 
(hereinafter  referred  to  as  "Jolywood").  Now  the 
standard  modules  JW-HD108  series(module  size 
1722*1134*30mm  and  1728*1134*30mm),  the 
manual  would  be  updated  when  new  module 
introduced  in  the  future.  Failure  to  follow  these 
safety guidelines may result in personal injury or 
death or property damage.

The installer must read and understand this guide 
before  installation.  Any  question,  please  contact 
our  customer  service  department  or  our  local 
representative for more detailed information. The 
installer must follow all safety precautions in this 
guide,  local  requirements,regulations  of  laws  or 
authorized  agencies  requirements.  Before 
installing a solar photovoltaic system, the installer 
should  be  familiar  with  its  mechanical  and 
electrical  requirements.  The  installer  required 
relevant professional knowledge, and the system 
must  be  installed  and  maintained  by  qualified 
person with professional knowledge.

Please store this guide in a safe place for future 
reference  (maintenance),  which  would  also  be 
useful when selling or disposing of the modules.

The  module  installer  must  inform  the  end 
customer  (or  consumer)  of  the  above  matters 
accordingly.

Jolywood  reserves  the  right  to  change  this 
installation  manual  without  prior  notice. 
Jolywood does not make any guarantee for any 
express or implied information contained in this 
manual.  If  customer  fails  to  follow  the 
requirements  listed  in  this  manual  during  the 
installation  of  the  modules,  the  limited  product 
warranty provided would be invalidated.

For  any  of  the  following  injuries  or  losses, 
including  but  not  limited  to  bodily  injury  and 
property  damage  caused  by  module  operation, 
system installation errors, and failure to follow the 
instructions  of  this  manual,  Jolywood  is  not 
responsible for that.

Before installing, wiring, operating or maintaining 
modules,  you  should  read  and  understand  all 
safety  rules.  Modules  will  generate  electricity 
when exposed under a light source environment. 
The  generate  electricity  from  array  of  multiple 
modules  would  cause  fatal  electric  shock  or 
burns. Person without authorization and relevant 
training  should  not  touch  modules  and  wiring 
terminals.

The modules of Jolywood have passed the tests of 
IEC standards in certification agencies. Please rest 
assured that you can use them under the premise 
of  complying  with  the  requirements  of  this 
installation manual.

Содержание HD108N

















Отзывы: