Jolly Mec SUPERJOLLY EVO 68X50 4S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 36

ENGLISH
11.
Mount the control unit making sure the installation point is not too hot (max 50-60°C).
12.
To install the fan, remove the fire base and the lower closing plate ( F
ig
. 15-20).
13. Bend the back edge of the fan ( F
ig
. 21). downwards to prevent
vibrations and noise; fit it in place and screw it down by fixing
it directly to the fireplace.
14. Once the fan has been fitted and electrically-connected, the
probe has been connected to the control unit and the device
operating functions have been tested, close all access to the
compartment using the parts indicated in section 12 following
the directions in the reverse order.
15.
Once the fireplace is fitted in place and all the installation
operations have been completed, proceed with the lagging
phase as required.
Electrical connections must be carried out by skilled personnel according to the regulations in force (2014/30/EC
and 2014/35/EC).
WARNING
F
ig
. 15
F
ig
. 18
F
ig
. 16
F
ig
. 17
F
ig
. 20 F
ig
. 19
F
ig
. 21
23