Jolimark TP850 Series, Руководство пользователя

Страница: 30 / 65

TP850
User’s Manual
- 24 -
Subnet Mask Set the subnet mask of the printer Wi-Fi interface. It is suggested that the subnet
mask should be the same with the wireless networks. (Check the subnet mask in
figure 11)
Printer Port Set the port number of the printer Wi-Fi interface. 9100 is recommended.
Remote IP Allow printer to receive the printing data sent by the target IP (or IP segment).
Fill in the corresponding segment according to the wireless network IP address you
find out in figure 11.
5. Click “Save” to save the set parameters and then restart the printer.
2.8.3 Checking Wi-Fi Parameters
After setting Wi-Fi network parameters, you should check the parameters to ensure the Wi-Fi network
connection is proper.
1. Through “ping” command to check if the printer connects to network or not.
2. When “WLAN type” is select to “Infrastructure”, you could look into the Wi-Fi indicator lights to judge
the connection status.
Figure 11