Jolimark BP-1000K (Model B), Руководство пользователя

Страница: 18 / 44

BP-1000K User’s Manual
3.5 Feeding the Passbook
Follow the step as below to feed the book which the thickness is over 2MM:
1. Turn on the printer and setting the paper process of thick paper mode.
2. Open the passbook, turn to the page which should be printed and make it flat.
3. Place the passbook on the front platform and feeding the passbook into the printer within the scale
scope of which sign on the paper entrance of the printer. After the printer auto skew adjustment the
book would be sent to the printing home position, then it is ready to be printing.
2. Close the upper cover before printing or it will not working.
Note
：
1. Don’t feed a book with creases or rip.
Figure 3-4 Feeding the passbook
3.5 Installing Continuous Paper (Applicable only for specific versions)
1. Remove the rear cover of the printer.
Right lock lever
Chain gear
Rear cover of printer
Chain gear cover
Figure 3-5 Remove the rear cover of printer
2. Connect the printer and the power, and switch the paper process mode of tractor paper printing.
(Please see the control panel operation way in chapter 4).
3. Loosen the chain gear locking staff of the tractor (optional), then move the left chain gear to the
fitting position, and press the lock lever to lock the left chain gear.
4. Open the cover of the chain gear, then installing the tractor paper onto the chain gears and
close the cover of it (Show as figure 3-6).
- 14 -