Jolimark BP-1000K (Model B), Руководство пользователя

Страница: 11 / 44

BP-1000K User’s Manual
Figure 2-11 Tighten up the ribbon core
7. Press down the upper frame and pull the upper frame lever to the front, lock the upper frame lever
by pulling it backwards after the upper frame is in correct position. At last, close the upper cover.
Figure 2-12 Lock the upper frame
Note: 1. When you remove the ribbon cartridge, please refer to the description on the right and
follow the steps.
2. When the print out becomes faint, you need to replace the ribbon cartridge. Use of worn
out ribbon will damage the print head.
3. Never move the print head when the printer is ON condition or else the printer may be
damaged. Don’t touch the print head as it will be hot during printing.
4. Use genuine Jolimark JMR115 consumables or else warranty will be void.
2.5 Connecting to Your Computer
The printer can configured with a parallel interface or USB interface. (According to specific interface
standards) Connect your computer to the desired interface as your requirement. (Show as picture 2-13,
and 2-14)
Note: Before connecting the parallel interface, please make sure the power of the printer is shut
down. Must after tighten the cable you may turn on the power, or it will damage the
printer.
2.5.1 Connecting the Parallel Interface
1. Turn off both the computer and the printer. Plug the parallel cable connector securely into the
printer’s parallel interface. Squeeze the wire clips together until they lock in place on either side of
the connector.
2. Plug the other end of the cable into the computer’s parallel interface; then tighten the screws on
either side of the connector.
- 7 -