2. Correct use also includes compliance with the instruction manual and an observation of the
care and maintenance conditions.
3. Pay attention to and observe generally applicable statutory and otherwise binding regula-
tions relating to accident prevention and environmental protection in addition to the information
provided in the instruction manual!
4.
All personnel commissioned to work on or with the device must have read this instruction
manual, and particularly the safety instructions chapter, before starting work. This applies
especially for personnel who only work with the device occasionally.
5. Stop the device immediately should you notice changes to the device or its operating be-
haviour that are relevant to its safety. Have these remedied before restarting work.
6.
Do not carry out any modifications, additions or conversions to the device! This also ap-
plies to the installation and adjustment of safety equipment.
7. Spare parts must meet the technical requirements specified by the manufacturer. This can
only be guaranteed with original joke spare parts.
8. Any work on/with the device may only be carried out by qualified, appropriately trained and
authorised personnel. Pay attention to minimum statutory age limits!
9.
Wear safety goggles when working with the handpiece.
10. Personnel undergoing training or in a general apprenticeship should only be allowed to
work with the machine under the constant supervision of an experienced opera-tor!
11. Restrain from any type of work that could jeopardise your safety.
12. The device may only be used if all protective and safety equipment is in place and in proper
working order.
13. Do not leave the device unattended when switched on!!
14. Stop and secure the device immediately in the event of malfunctions! Faults must remedied
at once.
Warranty/ Identification
joke Technology GmbH warrant the correct manufacture of every joke product which is delivered in
accordance with the terms of contract and supply.
This warranty does not cover damages caused by normal wear and tear, incorrect handling, negli-
gent use, the fitting of non-original spare parts, inadequate care and/or a failure to comply with this
technical manual.
The device may only be used by appropriately trained personnel. If it is not, all warranty claims will
be forfeited according to the terms of supply.
Device identification
The manufacturer’s code and type code, CE label and series number can be found
• on the rear of the housing and on the head section in the case of the handpieces
• on the rear of the housing in the case of the maintenance unit
• and on the bottom side of the foot switch.
Disposal
This product shall not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and electonic
equipment.
03
4
Important
Important
Caution
Caution
