2TLC172075M0201, rev. A
5
www.jokabsafety.com
2012-09-27
2
Overview
General description
JSNY5 offers three contacts which give both the two contacts needed for high safety level as well as a contact for
indication of operating status. The advanced design offers the choice of four operating positions from only two
actuator entries by simply rotating the head through 180°.
However when installed and in its working condition only one entry can be used, ensuring no other element can
tamper with the switch function.
Safety regulations
Warning!
Carefully read through this entire manual before using the device.
The devices shall be installed by a trained electrician following the Safety regulations, standards and the Machine
directive.
Failure to comply with instructions, operation that is not in accordance with the use prescribed in these instructions,
improper installation or handling of the device can affect the safety of people and the plant.
For installation and prescribed use of the product, the special notes in the instructions must be carefully observed
and the technical standards relevant to the application must be considered.
In case of failure to comply with the instructions or standards, especially when tampering with and/or modifying the
product, any liability is excluded.
