2TLC172075M0201, rev. A
10
www.jokabsafety.com
2012-09-27
Installation precautions
The safety switch may not be used as a mechanical stop!
Make sure that the head is properly attached to the switch body. A misaligned or loose head can lead to
loss of the safety function.
The device must be mounted on a plane surface.
Warning!
All the safety functions must be tested before starting up the system.
Maintenance
Warning!
The safety functions and the mechanics shall be tested regularly, at least once every year to confirm that all the
safety functions are working properly (EN 62061:2005).
In order to maintain the safety level, regular inspections for tear and wear, as well as fixing and alignment of switch,
actuator, brackets, doors etc should be carried out.
In case of breakdown or damage to the product, contact the nearest ABB/Jokab Safety Service Office or reseller.
Do not try to repair the product yourself since it may accidentally cause permanent damage to the product,
impairing the safety of the device which in turn could lead to serious injury to personnel.