Joie krome, Инструкция по эксплуатации

Страница: 10 / 17

Align the sides of the carry cot with the adapters on the frame. Place the carry cot directly down until it clicks into
place.
42
A click sound means carry cot assembled completely.
43
! Always remove the adapters before using the carry cot.
! Please don’t fold stroller when attaching the carry cot.
Remove Carry Cot
Press release buttons on both side of carry cot
44
- 1
, and then lift it upwards.
44
- 2
Use Footmuff
The soft footmuff can provide your child with a warm and comfortable environment.
Assemble the footmuff by following these steps.
1. Place the footmuff over the seat after unziping it, thread the shoulder harnesses, waist harnesses and crotch
harness through respective slots.
45
2. Thread loop fastener on the top of the footmuff through the backrest, and then stick it to the hook fastener.
46
3. Place baby into the footmuff, lock the safety buckle, and then rezip the footmuff.
The assembled footmuff is shown as 47
Use Rain Cover
To assemble the rain cover, place it over the stroller seat. Attach 4 pairs of hook and loop fasteners on the rain
cover to the seat side armrest.
48
! Before using the rain cover, make sure the seat has been fastened.
! When using the rain cover, please always check its ventilation.
! When not in use, please check that the rain cover has been cleaned and dried before folding.
! Do not fold the stroller after assembling the rain cover.
! Do not place your child into the stroller assembled with rain cover during hot weather.
Use Wheel Bag
Please remove the front and rear wheels and place them into the wheel bag to avoid losing when do not use them .
Use Mosquito Net
Cover the stroller with mosquito net, and follow the following steps to secure the mosquito net.
49
1. Fasten the 2 elastic straps to the backrest plastic hook.
2. Wrap bottom edge of the calf support, Fasten the elastic strap to under the calf support.
! The seat back must be flat when using the mosquito net.
18
17
Adjust Handle
The handle has 3 positions.
To adjust the height of the handle, pull the handle upward or downward 28
- 1
while pressing the handle
adjustment button. 28
- 2
Fold Stroller
! Please fold the hood before folding the stroller.
Lift the folding button 29
, step the folding pedal downwards
29
- 1
, push the stroller forward to fold
29 - 2
.
The storage latch will automatically hook onto the storage mount, then the stroller is folded and locked
completely.
30
Use Accessories
Infant Child Restraint (page 12 8 ) Carry Cot (page 12 7 ) Footmuff
(page 12
6
) Rain Cover (page 12
29
) Wheel Bag (page 12
30
) Mosquito Net
Not all accessories are included on some models.
Use with Joie Infant child restraint
When using with Joie infant child restraint gemm, please refer to the following instructions.
1. To attach adapter, place adapter onto mounts as show
31
, A "click" sound means the adapter is locked
completely.
32
2. To attach infant child restraint, place infant child restraint onto adapter as show
33
, A "click" sound means
the infant child restraint is locked completely.
34
3. To remove infant child restraint, lift the infant child restraint upwards
35
- 1
while pressing the two stroller fix
release buttons A.
35
- 2
4. To remove adapter, lift the adapter upwards
36
-2
while pressing the two release buttons
36
- 1
. Remove
the adapter show as
37
! If you have any problems about using the stroller and the adapter, please refer to their own instruction
manuals.
! Please don’t fold stroller when attaching the infant child restraint.
Use Carry Cot
Carry Cot Assembly
1. Open the wire support on both side of the carry cot
38
, Then click the wire into the four plastic parts, A
“Click” sound means the wire support is secure.
38
- 1
Place the mattress into the carry cot
39
, and smooth it down.
39
- 1
! Both sides of the mattress is available, the cool side used in summer and the warm side used in winter.
! Always use the mattress when using the carry cot.
! Mattress cover can easily be removed to wash.
2. Adjust carry cot hood
Open the hood and pull the front end to secure.
40
Close the hood by pressing the folding buttons on either side.
40
- 1
3. Assembly carry cot apron
Place the apron over the carry cot
,
then fix it on the carry cot by 3 magnets and 2 pairs of hook and loop
fasteners. 41
- 1
Carry cot assembled completely as
41
Attach Carry Cot onto Chassis