![Johny AK/12 AUT Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/johny/ak-12-aut/ak-12-aut_operation-and-maintenance-manual_2025225006.webp)
Operation and maintenance manual
Blender AK/12 AUT Johny
KIOSIDIS PRIVATE COMPANY P.C. Commercial Bar Equipment
6
6. SAFETY MEASURES AND GENERAL INSTRUCTIONS
The electric blender
ΑΚ/12 Johny
is designed, manufactured and as-
sembled according to the directions:
(LVD) Low Voltage 2014/35/EU
(EMC) Electromagnetic Compatibility 2014/30/EU
(RoHS) Restriction of Hazardous Substances 2015/863/EU amend-
ing 2011/65/EU
7. TRANSPORTATION, INSTALLATION AND CONNECTION
7.1 Transportation
The blender
ΑΚ/12 Johny
is transported packed until its initial place-
ment. After the blender is unpacked it is carried by a person since the
appliance is portable. Total weight of the appliance is 5.050 gr.
Use transportation vehicle to transport the appliance when
packed.
When you receive the blender, check for any damages caused
during transport.
7.2 Installation
♦
The blender should be placed on a flat, smooth and steady sur-
face, so that there will be no risk for the blender to lose its stability after
installation.
♦
Always place it indoors at a room temperature of around 25
o
C
(maximum operation temperature 35
o
C). The place must be adequately
ventilated and well lit. Good ventilation is a basic requirement for the in-
stallation place.
♦
The place should be clean, free from water and oil residues.
♦
It should be connected to the mains power supply using only a
socket (“Deep Hole” type) connected to a stable current supplier. It is
recommended not to use extensions for the power supply cord.