Operation and maintenance manual
Blender AK/12 AUT Johny
KIOSIDIS PRIVATE COMPANY P.C. Commercial Bar Equipment
16
♦
Connect the blender to the mains power supply and set the main
switch to position I.
♦
Select between manual and automatic operation.
♦
Fill while functioning over the cover for the filling on the top of the bowl
cover. During operation you may add ingredients through the hole of
the cover removing it’s transparent lid.
♦
To deactivate the blender put the main switch at “O” position.
ATTENTION!
Never fill the bowl with very hot liquids or with solid
ingredients without a liquid base.
ATTENTION!
Never use the blender when the bowl is empty.
ATTENTION!
During operation take extra care if you have long
hair, or wear a tie, scarf, etc. or any other objects that could tangled.
Only authorized and adequately trained personnel who are not
under influence of alcohol or drug should operate the blender.
12. CLEANING – MAINTENANCE
ATTENTION!
Cleaning and maintenance should be performed
when the blender is deactivated and unplugged from the power supply
socket.
ATTENTION!
Pay the proper attention when touching the moving
parts because they are very sharp and the risk of injury is high.
12.1 Cleaning Instructions
♦
Set the main switch at Ο position.
♦
Remove the plug from the power supply socket.
♦
Remove (the bowl, the cover and the cover’s lid) and wash them up
with plenty of hot water and detergent.
