Operation and maintenance manual
Blender AK/12 AUT Johny
KIOSIDIS PRIVATE COMPANY P.C. Commercial Bar Equipment
15
11. OPERATION
11.1 Steps before first use
Before using the blender for the first time the operator should follow
the instructions bellow:
♦
Get familiarized with the assembling / disassembling of the blender.
♦
Before the first use remove the bowl and put it back in its correct
place making sure it fits correctly in the housing.
ATTENTION!
Remember that the magnetic switch on the bowl
cover should always be aligned with the one on the body of the blender.
♦
Check for the proper function of the control buttons.
♦
Fill the bowl with a small quantity of water and some ice-cubes and try
to use all the available functions.
♦
Check the stability of the blender.
♦
Wash the bowl, the bowl’s cover and the lid provided for the filling dur-
ing operation. Fill with hot water and washing up detergent and oper-
ate.
11.2 Operating instructions
ATTENTION!
Make sure that the bowl’s cover and the cover’s lid
have been placed correctly before you turn on the blender.
In order to turn on the blender you should follow the instructions be-
low:
♦
Place the bowl on to its drive mechanism within the special housing.
♦
Put the ingredients inside the bowl without exceeding the maximum
net operating volume of 1,5 lt.
♦
Place the bowl’s cover. Remember that the magnetic switch on the
bowl’s cover should be aligned with the one on the body of the blend-
er.
♦
Place the lid provided for the filling during operation and secure it in
place at all three fastening points.
