radio station in forward
direction
• Use this button to adjust the
hour in CLOCK or ALARM
time
7. SNOOZE / SLEEP
• Use this button to temporarily
suspend the ALARM for a
short period
• Use this button to set the
sleep time
8. PM INDICATOR
• This indicator shows that the
time display is PM
9. AL1-B INDICATOR
• This indicator shows that the
unit is in ALARM-1 buzzer
mode
10. AL1-R INDICATOR
• This indicator shows that the
unit is in ALARM-1 radio
mode
11. AL2-B INDICATOR
• This indicator shows that the
unit is in ALARM-2 buzzer
mode
12. AL2-R INDICATOR
• This indicator shows that the
unit is in ALARM-2 radio
mode
13. LED DISPLAY
• Display for the Clock and the
Radio frequency.
14. SPEAKER
• Sound output.
15.FM WIRE ANTENNA
• Extent this wire antenna to
obtain better FM broadcasting
16. DC JACK
• Connect the unit to the
AC/DC adaptor.
17. BATTERY COMPARTMENT
• Compartment for the
back-up battery.
CONNECTING THE UNIT
TO POWER
Plug one end of the AC adaptor
into the DC power Input, and then
plug the other end into AC wall
outlet. Before switching on the
unit, make sure that the voltage of
your electricity supply is the same
as that indicated on the rating
plate.
BATTERY BACKUP
Insert two pieces UM-3 batteries
into the battery compartment. Be
sure to observe the proper polarity
(the "+" and "-" signs) as indicated
inside the battery compartment.
In case of power failure or inter-
rupted AC power, the current time
and alarm time settings, the sto-
red radio stations are preserved in
the memory of the unit by means
of battery back-up function.
SETTING THE CLOCK
A
. With the unit in CLOCK mode,
press and hold the TIME/MEM/M+
button for about 1 second, the
time will begin to flash on the LED
display.
12
