Johnson Igea, Инструкция по эксплуатации

Страница: 25 / 28

25
CLEANING AND MAINTENANCE
All cleaning operations must be carried
out with the appliance switched off and
the plug unplugged from the electrical
socket.
To clean the body of the appliance (A) use
only a damp cloth with neutral detergent if
necessary. During this operation, be very
careful not to let any type of liquid enter
through the slots of the appliance.
ATTENTION: never immerse the body of
the portable aspirator (A), the plug and
the power supply cable of the power sup-
ply (P) in water or other liquids.
To clean the accessories (L, M and N) use
hot water and a normal detergent for di-
shes, dry them well before putting them
away.
Never use abrasive products, detergents
for plastics, solvents or aggressive solu-
tions that could corrode or damage their
surfaces to clean the appliance and suc-
tion accessories.
Cleaning the HEPA filter
ATTENTION: clean the dirt container (E)
and the HEPA filter (G) in good time, the
suction power will be reduced if the dirt
container (E) is full or the HEPA filter (G)
clogged.
Press the release button (F) to separate the
dirt container (E) from the motor body (A)
by pushing it down. Extract the HEPA filter
(G) by grasping the small tab marked with
“PULL” on the edge of the
HEPA filter (G),
pull it upwards to remove the HEPA filter
(G) from the dirt container (E) and proceed
with its cleaning.
ATTENTION: wash the HEPA filter (G)
only with clean water without using
soaps or detergents.
Then empty the dirt container (E) into a su-
itable plastic bag and, if necessary, wash
it with water.
Allow all components to dry well and pro-
ceed with reassembly.
Reassemble the motor body (A) of the ap-
pliance with the dirt container (E), after
having inserted the HEPA filter (G) in its
seat in the dirt container (E) by inserting
the hook (S) on the motor body (A ) into
the slot (T) of the dirt container (E) and
push the latter upwards until it locks com-
pletely.
N.B. : before starting the portable aspi-
rator, make sure that you have correctly
mounted the HEPA filter (G) in the dirt
collection container (E) and that you have
correctly hooked everything to the motor
body (A) of the appliance.
STORAGE OF THE APPLIANCE
ATTENTION: before putting away the por-
table aspirator, move the on / off button
(B) back to the “OFF” position, disconnect
it from the mains and remove any acces-
sories installed.
Store the device in a cool and dry place,
preferably inside its original box and out
of the reach of children.