21
- when the pilot light ignites, make sure that the control knob is always kept
pressed while pressing the ignition button.
The control knob can be released when the pilot light flame ignites.
- The pilot light flame can be checked through a round window with a sliding
cover located to the left of the burner control panel (D).
- If the pilot light flame does not ignite or goes out, repeat step 3.
SWITCHING OFF
1. Turn the control knob to the PILOT position
2. Press and turn the control knob to OFF
3. Completely close the cylinder gas valve.
GENERAL DESCRIPTION
Due to its particular type of operation with direct and reflected irradiation, this
appliance is effective over an area about 15-20 sq.m with a range of about
2m.The area covered and the heating efficiency vary according to the climate
and weather conditions, the position of the appliance (space completely open
or partially shielded on one or more sides) and the individual perception of
heat.The level of heat felt, completely subjective and not measurable, increases
significantly the closer you are to the flame.
MAINTENANCE
IMPORTANT!BEFORE CARRYING OUT ANY KIND OF MAINTENANCE, MAKE
SURE THAT THE VALVES OF THE GAS SUPPLY AND/OR THE BURNER ARE
CLOSED.
IGNITER
OFF
PILOT
LO
HI
OFF: Heater turned off
HI: Maximum temperature position
LO: Minimum temperature position
Control knob
Power button
Control panel
