JOHNSON SYSTEMS JS-ICON 1210 Скачать руководство пользователя страница 28

Страница: 28 / 34

www.johnsonsystems.com

43. FW-LOAD

Load new firmware into the MADD-24 via the EEPROM memory module.

If a firmware update is required, Johnson Systems Inc. may supply an EEPROM

memory module with the latest firmware version. The firmware EEPROM memory

module can be inserted into PORT1 on the MADD-24 board and the firmware can be

loaded into the microcontroller.

Press EXECUTE to enter the menu.

DISABLED

This menu is disabled for inadvertent use. Proceed to enable.

ENABLED

Press and hold MENU (

) and MENU (

) at the same time for 4-5 seconds.

MEMCHECK

Automatically checks the EEPROM memory module for firmware type.

CRC-TEST

Automatically does a CRC test on the firmware code in the EEPROM.

>>>>>>>>

The CRC test in progress.

VER X.X

Displays the firmware version on the EEPROM memory module.

UPDATE??

Press EXECUTE to proceed.

SURE ???

Press EXECUTE to proceed.

UPDATING

Firmware update in progress.

WILL

Firmware update in progress.

AUTO

Firmware update in progress.

RESTART

Firmware update in progress.

PLEASE

Firmware update in progress.

WAIT....

When firmware update is complete the RUN LED flashes and system restarts.

NO MEM!

Displayed if an EEPROM memory module is not detected.

WRONG

Displayed if the wrong type (parameter) of EEPROM memory module detected.

MEM TYPE

Displayed if the wrong type (parameter) of EEPROM memory module detected.

WRONG

Displayed if the wrong product type of EEPROM memory module detected.

PRODUCT

Displayed if the wrong product type of EEPROM memory module detected.

CRC ERR!

Displayed if the CRC test fails and the EEPROM memory module is defective.

WARNING: Do not reset or turn the power off while the firmware is being updated.

Doing so will cause unrecoverable loss of firmware data that is being loaded into the

MADD-24 microcontroller.

44. RESTORE

Restore parameters saved in the EEPROM memory module.

All of the configuration setting parameters can be restored from the EEPROM

memory module if they have been inadvertently changed or corrupted. This feature

can also be used to load configuration setting parameters into a different or new

control module. This reduces the configuration time for multi-system applications that

require similar settings or when a replacement control module is required.

Press EXECUTE to enter the menu.

DISABLED

This menu is disabled for inadvertent use. Proceed to enable.

ENABLED

Press and hold MENU (

) and MENU (

) at the same time for 4-5 seconds.

MEMCHECK

Automatically checks the EEPROM memory module for parameter type.

OKAY....

The EEPROM memory module has been verified for parameter type.

PROCEED?

Press EXECUTE to proceed.

SURE ???

Press EXECUTE to proceed.

CRC-TEST

Automatically does a CRC test on the parameter code in the EEPROM.

WAIT

CRC test in progress.

VERIFY

CRC test in progress.

DONE!!

CRC test is done and the parameter restore automatically begins.

WILL

Parameter restore in progress.

AUTO

Parameter restore in progress.

Содержание JS-ICON 1210



































Результаты поиска

Содержание JS-ICON 1210

Отзывы:

Похожие инструкции для JS-ICON 1210

Бренды по названию

Популярные бренды

JOHNSON SYSTEMS JS-ICON 1210, Руководство пользователя

Результаты поиска

Содержание JS-ICON 1210

Отзывы:

Похожие инструкции для JS-ICON 1210

Бренды по названию

Популярные бренды