LED and accessories tables
Table 8: VMA18 Controller status LEDs
LED label
LED color
Normal state
Descriptions of LED states
POWER
Green
On Steady
Off Steady = No power
On Steady = Power is supplied by primary voltage
FAULT
Red
Off Steady
Blink - 2 Hz = Download or startup in progress, not ready for normal
operation, SA Bus devices offline (such as Netsensors)
Off Steady = No faults
On Steady = Device fault or no application loaded
N2/FC BUS
Green
Blink - 2 Hz
Blink - 2 Hz = Data transmission (normal communication)
Off Steady = No data transmission (auto baud in progress)
On Steady = Communication lost; waiting to join communication ring
SA BUS
Green
Blink - 2 Hz
Blink - 2 Hz = Data transmission (normal communication)
Off Steady = No data transmission (N/A - auto baud not supported)
On Steady = Communication lost; waiting to join communication ring
EOL
Amber
Off
On Steady = EOL is active
Off Steady = EOL is not active
Table 9: VMA18 Controller accessories. Order separately
Product Code Number
Description
Mobile Access portal (MAP)
Gateway
To identify the appropriate product for your region, refer to the
Mobile Access Portal Gateway Catalog
Page
(LIT-1900869).
1
NS Series Network Sensors
Refer to the
NS Series Network Sensors Product Bulletin (LIT-12011574)
for specific sensor model
descriptions.
Y64T15-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 92 VA, Foot Mount, 30 in. Primary Leads
and 30 in. Secondary Leads, Class 2
Y65A13-0
Transformer, 120 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount (Y65AS), 8 in. Primary Leads
and 30 in. Secondary Leads, Class 2
Y65T42-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Hub Mount (Y65SP+), 8 in.
Primary Leads and Secondary Screw Terminals, Class 2
Y65T31-0
Transformer, 120/208/240 VAC Primary to 24 VAC Secondary, 40 VA, Foot Mount (Y65AR+), 8 in.
Primary Leads and Secondary Screw Terminals, Class 2
AP-TBK4FC-0
Replacement MS/TP FC Bus Terminal, 4-Position Connector, Blue, Bulk Pack (10 pack)
AS-CBLTSTAT-0
AS-CBLTSTAT-0 Cable adapter for connection to 8-pin TE-6700 Series sensors
AS-CBLVMA-1
Cable Adapter, 8-pin Female Socket to 6-Pin Male Jack (Bulk Pack of 10)
AS-CBLVMA-2
Cable Adapter, 8-pin Female Socket to 8-pin Male Jack with 6-Pin Female Socket for Wireless
Commissioning Converter (Bulk Pack of 10)
NS-WALLPLATE-0
Network Sensor Wall Plate (80 mm x 80 mm [3.15 in. x 3.15 in.] square), used with an 80 mm by 80
mm (3.15 in. x 3.15 in.) network sensor and must be mounted to a 0.6 m by 1.2 m (2 ft by 4 ft) wall box
1
The MAP Gateway serves as a replacement for the BTCVT, which is no longer available for purchase, but continues to be supported
on select controllers.
Repair information
If the VMA18 Series controller fails to operate
within its specifications, replace the unit. For a
replacement unit, contact the nearest Johnson
Controls representative.
VMA1826/1832 VAV Controller Installation Guide
23
