Johnson Controls VA9905 Series Скачать руководство пользователя страница 8

Страница: 8 / 10

14-88360-03206, Rev. A

Risk of electric shock.

Disconnect the power supply before making electrical connections to avoid electric shock.

Risque de décharge électrique.

Débrancher l’alimentation avant de réaliser tout raccordement électrique afin d’éviter tout risque de décharge électrique.

Wire the VA9905 Actuator as described in the table below:

Manual Override and Flow Direction

The manual override lever is used to indicate which ports are in use.

In the absence of power to the actuator, manually set the pointer to the desired position to regulate the flow of the

valve.

Note:

The setup procedure described in the

Attaching the Actuator to a Six-way Valve

section sets ports 1 and 4 to full

flow.

Note:

The ball valve and actuator pointer rotate in opposite directions.

The following illustrations indicate lever position and flow:

Full Flow on ports 5 and 6

No Flow

Full Flow on Ports 1 and 4

When no actuator is installed, use the following positions of the stem to set the flow of the valve:

Note:

The cuts on the valve stem indicate the ports inside the valve.

Full Flow on Ports 5 and 6

No Flow

Full Flow on Ports 1 and 4

Содержание VA9905 Series










