4. If the ‘P/Z’ terminal is programmed as an output, a small relay (such as DSC model RM-1 or RM-2), buzzer or other
DC operated device may be connected between the positive supply voltage and the ‘P/Z’ terminal (max.load is
50mA).
Note:
P/Z terminal is not to be used for fire applications but can be used for low risk ULC commercial burglary
applications.
Figure 3 - Wiring
HS2TCHPRO/
HS2TCHPROBLK
RED R
BLK B
YEL Y
GRN G
To zone or P/Z
PGM output
____
____
____
____
____
Basic Setup
This section describes how to configure the keypad, including enrollment, proximity tag setup, function key assign-
ment and label programming.
Setting the Keypad Language
Enter [000][000] then the two-digit language number.
Languages
01 = English (default)
08 = Czech
15 = Greek
02 - Spanish
09 = Finnish
16 = Turkish
03 - Portuguese
10 = German
18 = Croatian
04 - French
11 = Swedish
19 = Hungarian
05 = Italian
12 = Norwegian
20 = Romanian
06 = Dutch
13 - Danish
21 = Russian
07 = Polish
14 = Hebrew
Enrolling the Keypad
Keypads can be enrolled automatically or manually. In either case, the serial number of the device is used as an iden-
tifier.
Note:
If no keypad is enrolled on the system, the touchscreen displays the following message when powered up:
Press the Enroll button. Once the touchscreen is enrolled, use it to enroll other keypads and modules. The following
enrollment methods are available:
[902][000] Auto Enroll
- 8 -
