Johnson Controls Tyco PowerG PG8HRDW8, Руководство по установке

Страница: 18 / 42

Figure 8: 2-wire smoke detector wiring
AUX2
1
PGM
3 4 - + 2
+
-
+
-
Callout Description
1 2200 Ω end-of-line resistor
The following table lists compatible 2-wire smoke detectors:
Table 8: 2-wire smoke detectors
Detector name
FSA-210X FSA-210XLST FSA-210XRST C2WTA-BA (ULC)
FSA-210XT FSA-210XR FSA-210XLRST 2W-B (UL)
FSA-210XS FSA-210XRT C2W-BA (ULC) 2WT-B (UL)
FSA-210XST FSA-210XRS C2WT-BA (ULC) 2WTA-B (UL)
Note: For the DSC FS210 series, X in the detector name represents A for ULC and B for UL
listed models.
Note: If you use System Sensor detectors on a 2-wire loop, do not combine UL and ULC
detectors. For more information, refer to the System Sensor installation manual.
Note: Do not connect accessories, such as a PRM-2W or any other polarity reversal module, to
2-wire smoke detectors.
The UL compatibility ID for the FSA-210B series is FS200, and for the System Sensor models is A.
Note: For ULC listed installations, use FSA-210A series detectors or FSA-410A series detectors.
Note: You must calculate and test the current draw.
Table 9: 2-wire smoke detector initiation circuit
Item Specification
Class, supervised, power limited Class B IDC. 2-wire smoke detector interface
Compatibility identifier PG9HRDW8
DC output voltage 10.0 VDC to 13.8 VDC
Detector load 2 mA maximum
SEOL 2200 Ω
Maximum capacitance 10 μF
PG8HRDW8 and PG9HRDW8 IQ Hardwire PowerG Wired to Wireless Converter Installation Manual 18