SENTRY Carbon Dioxide Hand Portable Fire Extinguishers
Operation, Inspection, Service and Maintenance,
and Recharge Manual (Part No. 429425)
2018-OCT-11 REV. 05
FOREWORD
This manual is intended for use with SENTRY Carbon Dioxide
Hand Portable Fire Extinguishers – Models:
CD05-1 CD10-1 CD15-1 CD20-1
CD05A-1 CD10A-1 CD15A-1 CD20A-1
CD10-2 CD15-2 CD20-2
Those who may operate, recharge, inspect, or maintain these
fire extinguishers should read this entire manual. Specific
sections will be of particular interest depending upon one’s
responsibilities.
Fire extinguishers are mechanical devices. They require
periodic care. If the extinguishers are not installed properly, are
abused in service or are not properly maintained, they may not
perform reliably.
These extinguishers are pressure vessels that must be treated
with respect and handled with care.
Only genuine SENTRY replacement components shall be
installed on SENTRY products. Only Authorized SENTRY
Distributors shall be allowed to service and maintain SENTRY
products.
This manual is limited to uses herein described. For other appli-
cations, contact your local Authorized SENTRY Distributor or
Johnson Controls – Technical Services Department, Marinette,
Wisconsin 54143-2542, USA.
Note:
The converted metric values in this manual are provided
for dimensional reference only and do not reflect an actual
measurement.
Part Number: 429425
Date: 2018-AUG-07
SENTRY and the product names listed in this material are marks and/or registered
marks. Unauthorized use is strictly prohibited.
