Johnson Controls MS-VMA1615-0U, Руководство по установке, Страница: 5 / 21

Table 1: VMA1615/1630 Feature Callout Numbers and Descriptions
Physical Features: Description and References Callout
24 VAC, Class 2 Supply Power Terminal Block (see Supply Power Terminal Block ) 1
Device Address DIP Switch Block (see Setting the Device Address ) 2
Binary Outputs, 24 VAC Triacs (see Table 3 ) 3
Configurable Outputs: Voltage Analog Output (0–10 VDC) and Binary Output (24 VAC Triac) (VMA1630,
see
Table 3 )
4
Dual Port Fitting (see Figure 2 ) 5
Manual Override Button (see Mounting ) 6
Controller Coupler (see Mounting ) 7
Coupler Bolt (see Mounting ) 8
Universal Input: Voltage Analog Input (0–10 VDC)
Resistive Analog Inputs (0–600k ohm) (see Table 3 ):
0–2k Potentiometer
RTD: 1k Nickel, 1k Platinum, or A99B SI
NTC: 10K Type L (10K Johnson Controls Type II is equivalent to Type L) or 2.252K Type II
Dry Contact Binary Input
9
FC Bus Terminal Block. May also be used for N2 connections. See FC Bus Terminal Block (Or N2 Protocol
As Required) .
10
EOL (End-of-Line) Switch (see Setting the EOL Switch ) 11
SA Bus Terminal Block 12
Modular Port (FC Bus) RJ-12 6-Pin Modular Jack (see Modular Ports ) 13
Modular Port (SA Bus) RJ-12 6-Pin Modular Jack (see Modular Ports ) 14
Captive Spacer and Screw (see Figure 2 )
15
LED Status Indicators (see Table 8 ) 16
5 VMA1615 and VMA1630 Variable Air Volume Controllers Installation Instructions