background image

www.johnsoncontrols.com

M9220-Bxx-3 On/Off Electric Spring Return Actuators Installation Guide

 11

Compliance

United States

UL Listed, CCN XAPX, File E27734; to UL 60730-1, 

Automatic Controls for Household and Similar Use:, and UL 60730-2-14 

Part 2, Particular Requirements for Electric Actuators (Models: All)

Canada

UL Listed, CCN XAPX7, File E27734; to CAN/CSA E60730-1, 

Automatic Controls for Household, and Similar Use: and CAN/CSA 

E60730-2-14 Part 2, Particular Requirements for Electric Actuators 

(Models: All)

Europe

CE Mark - Johnson Controls declares that this product is in compliance with 

the essential requirements and other relevant provisions of the EMC 

Directive and Low Voltage Directive.

Australia and 

New Zealand

RCM Mark, Australia/NZ Emissions Compliant 

(ModeIs: All M9220-xGx and M9220-xDx)

Shipping Weight

BAx and BDx 

Models

7.6 lb (3.5 kg)

BGx Models

6.4 lb (2.9 kg)

The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these 
specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damages resulting from misapplication or 
misuse of its products.

M9220-Bxx-3 On/Off Electric Spring Return Actuators (Part 2 of 2 )

Product warranty

This product is covered by a limited warranty, details of which can be found at 

www.johnsoncontrols.com/buildingswarranty

.

Patent

Patents: 

http://jcipat.com

Содержание M9220-Bxx-3













Отзывы: